Hammer crusher, also called hammer breaker, crushes materials in the form of impact. It can directly crush materials with a particle size of 600-1800mm into 25mm or less.
Hammer crusher, also called hammer breaker, crushes materials in the form of impact. It can directly crush materials with a particle size of 600-1800mm into 25mm or less. The hammer crusher is applicable to crushing materials of medium hardness in industrial sectors such as cement, chemical industry, electric power, and metallurgy, e.g. The secondary and fine crushing of limestone, slag, coke, and coal.
The hammer crusher will directly break the large particle size material to the required particle size, without multiple crushing, improving the crushing efficiency and reducing the operating cost.
the crushing size of the crusher can be adjusted according to the needs of users, through the method of adding or reducing gaskets to meet the production needs of different customers.
The hammer head is cast with high manganese steel, which has the advantages of high density, wear resistance and impact resistance, and can extend the service life of the equipment.
The hammer crusher has low noise, small vibration and high crushing efficiency during operation, which is conducive to energy saving and environmental protection.
The hammer crusher is mainly composed of engine, shell, hammer wheel, screen and reducer. When working, the material enters the crusher through the feed port, is affected by the impact and shear of the high-speed rotating hammer head, and is broken into small pieces. The crushed material is then discharged through the screen to achieve the required particle size requirements.
Hammer crusher is widely used in mining, metallurgy, building materials, chemical industry, feed and other industries, can be terrazzo, silica stone, coal and other medium and medium hardness materials to do medium and fine crushing operation. For example, it can be used to break bluestone, pebbles, granite, shale, coal, slag, lignite and other ores or hard materials.
Hammer crusher is suitable for crushing materials of various hardness, including but not limited to limestone, coal, slag, coke and other medium hardness materials. At the same time, it can also break bluestone, pebbles, granite and other ores or hard materials.
| Specification | Production capacity (t/h) | Motor power (kw) |
| PCΦ300x400 | 5-10 | 4P 11KW |
| PCΦ400x600 | 10-22 | 4P 22KW |
| PCΦ600x800 | 18-40 | 6P 55KW |
| PCΦ800x1000 | 25-50 | 8P 75KW |
| PCΦ1000x1000 | 30-55 | 8P 90KW |
